25kg BiaoYuan Extra Strength Self-Smoothing Compound - Gray, for exterior liner
- $1.00 /piece
- 1 piece
- Jinan Biaoyuan Construction Material Co., Ltd.
- Shandong, China
- Ms Susan Wang
brand: | table element | Strength level (Mpa): | other |
model: | SLM-100 | color: | grey |
Packaging Details: | 25kg/bag | feature: | Acid resistance, algae resistance, decoration, expansion, radiation resistance, fire resistance, sulfate resistance |
work: | Cement, preparation of mineral hard fillers, organic | Hardening properties: | super fast hardening |
Shipping Details: | 1 day after payment | Single package size: | 100X100X100 cm |
main ingreadient: | other | appearance: | grey |
type: | Portland cement / Portland cement | Package preview: | |
Gross weight per piece: | 1000.000 kg | place of origin; place of origin: | Shandong China |
Heat of hydration: | low calorie | Sales unit: | single product |
25kg BiaoYuan Extra Strength Self-Smoothing Compound - Gray, for exterior liner
1) Suitable for use as exterior wall liner;
2) For leveling subfloors prior to laying decorative floor coverings;
3) The interior can be left as a final wear surface and can be recoated.
Biaoyuan self-leveling cement is a high-tech green product with high technical content and relatively complicated technology. It is a dry mixed powder material combined with active ingredients. It has a wide range of uses and can be used in industrial plants, workshops, warehouses, commercial stores, exhibition halls, gymnasiums, hospitals, various open places, offices, and is also suitable for homes, villas, and cozy small rooms. Space, can be used as a decorative surface layer, can be used as a wear-resistant substrate.
Standard self-leveling concrete is a polymer modified cement with high flow characteristics, compared with traditional concrete, it does not need to add excessive water
place.
1: No isolation, good fluidity, self-leveling within a certain thickness.
2: There may be a reasonable construction and self-leveling time.
3: Quick-drying characteristics.
4: By adjusting the formula to meet the design requirements of different carrying capacity. Has excellent adhesion, no delamination hollowing.
5: Appropriate flexibility (bending strength).
6: It has good adhesion and wear resistance.
7: Low shrinkage, environmental protection characteristics.
project | index | |
Mobility (mm) | initial liquidity | ≥135 |
20min fluidity | ≥135 | |
Tensile bond strength (Mpa) | ≥1.0 | |
Abrasion resistance (g) | ≤0.50 | |
Dimensional change rate (%) | -0.15~+0.15 | |
24h compressive strength (Mpa) | ≥6.5 | |
24h bending strength (Mpa) | ≥2.5 | |
28-day compressive strength (Mpa) | ≥40 | |
28-day flexural strength (Mpa) | ≥4.2 |
1. The substrate must be clean, dry and firm, without any residue, and then paint the bottom surface with Xindadi special interface agent.
2. After about 2-6 hours, add water and mix well before construction. Self-leveling cement must be strictly self-leveling: water 25: 6-6.5kg and mix well. Pour 6~6.5kg of water into the bucket first, then pour the product side down while stirring, until the mixture is even, let it stand for 1 minute, and then stir again briefly.
3. Pour the mixture into the construction area and move it to the required uniform thickness with a zigzag rake (1-4mm thickness can be constructed). Before the initial setting, use the defoaming roller to remove the air mixed in before.
Notice:
1. There can be no excess water, otherwise the compressive strength will be reduced.
2. No strong wind or strong sunlight within 24 hours after construction.