BItop Super Seal Ac Stop Auto Fluorescent Leak Detector stop leak

Super Seal Ac Stop Auto Fluorescent Leak Detector

Bitop A/C stop leak will permanently stop leaks in condenser, connection hoses, evaporators,gaskets and o-rings in systems that can hold 5 inches vaccum for 25 minutes. If is not recommended for systems that lose more than 1 pound  per day or leaking compressors. It is 100%safe for all A/C systems, and will not damage the orifice tubes of recovery equipment.

A/C fixing treatment

1.  Extand the longer using of the compressor.

2. Reducing the conditioner outlet tempreture 2-3 degree in very shot time, to improve the inside drvingenvironment.

3 . Reduceing the load of the compressor to the engine,to save fuel. 4.Reducing noice and tempreture which coming from theworking compressor.

5. Use to eliminatethe oil, which is coming from conderser, evapora­ tion and pipeline.

6.   . Prevent any corrosion which happening in coolingsystem to en­ hance oxidation resistance.

Packing details: 80gx24pcs/shrink wrap,96PCS/CTN Carton Dimension: 39.5x28x33cm

Direction

1. Turn sliver twist valve all the way in a clockwise direction.

2. Shake can well.

3. Attach delivery system to can by screwing the red adapter to the top of the can puncturing the protective film.

4. Star car and turn A/C to max cooling.

5. Attach the quick coupler to the low side service port.

6. Once the quick coupler is attached check guage for accurate pressure reading. See table to compate outside temperature to sufficient pressure in system. If guage reading shows deficient pressure,slowly turn twist valve counter clockwise to release product.

7. Hold the can in a upright position and gently shake every 5 seconds while system is being charged. It should take 5-12 minutes for the can to be empty.

8. Check guage throughout process to measure psl. Guage reading is only accurate when the compressor is cycling. Do not over charg!If system pressure is still low, add more r134a.

Click here for more information