Sodium Naphthalene Sulfonate Formaldehyde Condensate Blend Manufacturer
- $430.00 /metric ton
- 1 metric ton
- Shandong Wanshan Chemical Co., Ltd.
- Shandong, China
- Mr xinbin liu
product name: | Sodium polynaphthalene sulfonate CAS:36290-04-7 | application: | concrete admixture |
payment terms: | wire transfer | PH value: | 7-9 |
Na2SOU4 content%: | <5% | model: | SNF-A,SNF-B,SNF-C |
place of origin; place of origin: | Shandong China | brand: | Wanshan |
port: | Qingdao | Other names: | FDN/SNF/FNS/PNS water reducer |
Supply capacity: | 9,000,000 metric tons/year | Solid content %: | ≥92 |
Item number: | 38244010 | Packaging Details: | 25kg, 600kg, 650kg, 700kg in a bag with PE film inside also available according to your requirements |
Chloride content %: | <0.3 | usage: | concrete industry |
appearance: | light brown powder |
Sodium naphthalene sulfonate formaldehyde condensate admixture manufacturer
Introduction:
CAS code: 36290-04-7
HS code (middle): 38244010
SNF superplasticizer, commonly known as superplasticizer, also known as naphthalenesulfonic acid formaldehyde condensate (abbreviation: SNF, PNS, NSF, etc.)
SNF is made of naphthalene, sulfuric acid, formaldehyde and liquid caustic soda through sulfonation, hydrolysis, condensation, neutralization, and then dried to make powder. SNF-A5% contains very small amounts of chlorides. Therefore, it meets the requirements of the concrete chemical admixture specification: ASTM designates C 494 as a Type F admixture, GB8076-2008 and GB50119-2003.
usage
Concrete produced by SNF has extremely high machinability properties known as high slump.
SNF also allows concrete to be produced with very low water/cement ratios at low or normal slump.
SNF is ideal for use in prestressed, precast, bridge decks or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability required to provide ease of placement and reinforcement.
SNF will also fluidize concrete, making it ideal for concrete placement or other applications requiring high slump.
SNF is compatible with Portland cement, ordinary Portland cement, Portland slag cement, fly ash cement, Portland pozzolan cement, etc.
advantage
SNF produces high slump flowable concrete without loss of strength.
SNF produces concrete with a low water-cement ratio and therefore high strength.
In prestressing/prefabrication work, SNF can be used to significantly reduce or eliminate the high energy requirements of external heat to accelerate curing.
SNF concrete, even at high slump, did not show significant segregation compared to concrete without superplasticizer at the same slump.
SNF facilitates rapid discharge of concrete from truck mixers, reducing work time and increasing mixer utilization.
Features, Features, and Features
Appearance: Light brown powder. Non-toxic, odorless, non-flammable, non-corrosive to steel.
Significant plasticity: Under the pre-determined mixing conditions of cement dosage and collapse degree, adding 0.3-1.5% of reinforced concrete can reduce the mixing water by 10-30%.
Improve the miscibility and disintegration of concrete mixture with water. As a condition for equivalent mixing, foldability can be increased.
Certificate of Analysis
thing | SNF-A | SNF-B | SNF-C |
appearance | light brown powder | light brown powder | light brown powder
|
solid content | ≥ 91% | ≥ 91% | ≥ 91% |
Sodium sulfate content | < 5% | <10% | <18% |
Chloride content | < 0.3% | < 0.4% | < 0.5% |
pH value | 7-9 | 7-9 | 7-9 |
Net starch fluidity 1% dosage 42.5# cement | ≥210mm | ≥205mm | ≥200mm |
Surface Tension | (70±1) x 10-3N/M | (70±1) x 10-3N/M | (70±1) x 10-3N/M |
Concrete Mixing Index Performance Data
parameter | SNF-A | SNF-B | SNF-C | |
Water reduction % | 18-28 | 17-25 | 16-22 | |
Water penetration % | 79 | 80 | 85 | |
Air content % | 2.0 | 2.0 | 2.0 | |
Set time distribution (minutes) | Initial setting time | -90 ~ +120 | -90 ~ +120 | -90 ~ +120 |
Terminal setup time | ||||
Compressive strength, % | 1 day | 170 | 165 | 160 |
3 days | 160 | 155 | 150 | |
7 days | 145 | 140 | 140 | |
28 days | 135 | 130 | 125 | |
Shrinkage,% | 28 days | 82 | 85 | 88 |
Corrosion to Rebar | not any | not any | not any | |
Note: Standard dosage: 1% (calculated by cement dosage) |
Package
25kg, 600kg, 650kg or 700kg in a bag with PE film inside, also according to your pallet requirements.
shipping
Sea, rail and air transport are all available.
packaging photo
1. Free samples
2. The largest SNF manufacturer in Asia, with an annual production capacity of 9 million tons.
3, The raw materials are also produced by ourselves, so we can offer the best price and the best quality and stable quality.
4. We also produce sodium gluconate, we can supply SNF and sodium gluconate at the same time, which can save cost. and time
5. Delivery within 7 days after deposit.
BASF is also our customer, we supply them with 3000-5000 tons, so please don't worry about our quality.
Other Products
-
White or light yellow crystal or powder sodium gluconate chemicals for sale$500.00 / metric ton