Semiconductor Heater Refrigerator Desktop Heater Radiator Air Conditioner Mini Electric Heater

Title goes here.

1. Power supply AC220-240V, 50Hz;
2. Power on, heating, fan rotation, 12 hours by default, no need to press any button;
3. Press the time button to switch to timer setting. "Old = press "+-" to set the timing time; new = press the time key to set
Set the time" and then press the time button to switch back to the temperature setting;
4. The initial display temperature is 20 degrees Celsius. Press the up and down keys to set the temperature, the range is
15~32 degrees Celsius. Under the time setting, the timer is set to 1~12 hours;
5. Press the fan button to switch between high (HH) and low (LL) wind speed;
6. When the set temperature is reached, the heating is cut off, the fan continues to work for 60 seconds and then stops, the screen displays OF,
Lower than the set temperature -1, reheat;
7. When the timing time is reached (if not set, the default time is 12 hours), the heating is cut off and the fan continues to run
After working for 60 seconds, it stops and the screen displays OF;
8. After the work is completed, press any key to restart the work (the default is 12 hours if the time is not set)
9. If there is a "natural wind" function, press and hold the "+-" button for three seconds to start it, and display CC;
Continue to hold down the "+-" button for three seconds to turn off, display "Natural Wind" and start setting